I. Deliverable(s):
5 files (importable into visio and/or word) of a modified cable raceway, representing the following lengths:
a. 4'
b. 3'
c. 1'
d. standard cable raceway images of same length WITHOUT any of the features shown below.
**quality. This is just for illustrative purpose to be used in a presentation; not for manufacturing**
II. Description:
*product is basically a cover raceway kit (3.5' wide and lengths of 48', 36' and 12') with 2'X1' displays with 1' gaps between them. (call this a display board)
*most of the displays can just be shown in mounted configuration, displaying price tags.
*I will need at least one display per display board that shows the slide track channel and cable access hole (to illustrate how each display is held in the display board).
*above the displays will be: two leds (.5' rnd)
*running along the top of the display board (note the cover raceway is -0.6' wide, put this there),
we need a .4' wide strip (this is like a touch bar, but can just be an off color for this work)
More details:
-each display needs to have a small 'slide track channel' that holds the display.
-each display needs to have a 1'X0.5' slot in the middle of the raceway
-centered approx .25' above each display there needs two small leds (circles of-1/8') in white and red
-along the top ridge of the raceway, there needs to be a single strip approximately .4' wide.
References to equipment images:
-standard plain raceway: Cable Concealer Management Raceway Kit - UMTELE 10 White Cable Channels - Cable Cord Hider Kit to Hide Wires for Wall Mount TV, Offices and Computers - 15.7 X 0.91 X 0.51 Inch(LWH)
Other factors:
-will likely need follow-on work to refactor product (and other products) for production in Feb.
About the recuiterMember since May 20, 2018 Sumit Sati
from Veneto, Italy