Find more Architecture Remote Jobs posted recently Worldwide
Required Lighting Design freelancer for Lighting designer needed for small, rustic cabin job
Posted at - Oct 1, 2022
Toogit Instant Connect Enabled
Minimum Requirement: Must be CLD certified and be able to provide a portfolio of similar projects.
Deliverable: Identify specific lighting product(s) along with purchasing source and placement recommendations.
Project: Need lighting recommendations for ceiling lighting for a small, 20'x17' cabin. Cabin has a steep, cathedral ceiling that is open to the peak (16') in the center of the cabin (approx 12'x12'). Two loft areas are on opposite sides of the cabin.
Roof construction is 2'x4' joists. The space between the joists will be insulated with a pine tongue and groove plank installed on top. I am looking for specific recommendations for recessed downlights to provide general/dramatic lighting. Preference is for low-voltage LED lights that can come in contact with rigid foam (EPS) insulation. Ideally, the in-ceiling wiring would all be low voltage and driver(s) would be installed remotely in an access panel on the wall. High voltage (120v) fixtures will be considered, but not preferred.
Detailed specs, to include roof slope, can be provided upon request.
About the recuiterMember since Mar 14, 2020 Adam Kalicak from Minnesota, United States