CAD designer to create a simple 3D model of a concealer cord/new product.

I. Deliverable(s):
5 files (importable into visio and/or word) of a modified cable raceway, representing the following lengths:
a. 4
b. 3
c. 1
d. standard cable raceway images of same length WITHOUT any of the features shown below.

**quality. This is just for illustrative purpose to be used in a presentation; not for manufacturing**

II. Description:
*product is basically a cover raceway kit (3.5 wide and lengths of 48, 36 and 12) with 2X1 displays with 1 gaps between them. (call this a display board)
*most of the displays can just be shown in mounted configuration, displaying price tags.
*I will need at least one display per display board that shows the slide track channel and cable access hole (to illustrate how each display is held in the display board).
*above the displays will be: two leds (.5 rnd)
*running along the top of the display board (note the cover raceway is -0.6 wide, put this there),
we need a .4 wide strip (this is like a touch bar, but can just be an off color for this work)

More details:
-each display needs to have a small slide track channel that holds the display.
-each display needs to have a 1X0.5 slot in the middle of the raceway
-centered approx .25 above each display there needs two small leds (circles of-1/8) in white and red
-along the top ridge of the raceway, there needs to be a single strip approximately .4 wide.

References to equipment images:
-standard plain raceway: Cable Concealer Management Raceway Kit - UMTELE 10 White Cable Channels - Cable Cord Hider Kit to Hide Wires for Wall Mount TV, Offices and Computers - 15.7 X 0.91 X 0.51 Inch(LWH)

Other factors:
-will likely need follow-on work to refactor product (and other products) for production in Feb.
About the recuiter
Member since May 20, 2018
Sumit Sati
from Veneto, Italy

---

---

Looking for help? Checkout our video tutorial
How to search and apply for jobs

How to apply? Do you have more questions about the Job?
See frequently asked questions