Reconfigure HachRF to Signal Power

Good day,

The job required is to deliver software using HackRF only (preferred) or HackRF with RaspberryPi to provide below data: (each step of the program shall be explained)

First output:
to provide signal power as voltage from HackRF GPIO or RasperryPi pin at certain frequency (defined as variable in the program in range of 500MHz - 6GHz). Noise should be eliminated.

Second output:
to provide average of signal power in range of 50 MHz (defined as second variable in the program in range of 500MHz - 6GHz) as voltage from HackRF GPIO or RaspberryPi pin at certain frequency (defined as variable in the program). Average samples can be taken every 5MHz as max (total 10 samples). Noise should be eliminated.
Program should provide change in signal power in less than 2 seconds (3 seconds max).

Program shall be self explained or with explanation attachment.

Time is very important and priority will be given prompt appliers.

In case program worked well and tested by us, more upgrade will be added later.

Please contact me if you are interested, looking forward for your offers.

Thanks
About the recuiter
Member since May 20, 2018
Book Myotel
from Bergamo, Italy

---

---

Looking for help? Checkout our video tutorial
How to search and apply for jobs

How to apply? Do you have more questions about the Job?
See frequently asked questions